"AOX-M" is a product developed by AOX itself and belongs to Electric Motor Operated Multi Turn Valve Actuator With Handwheel. The excellent quality of products comes from high-precision equipment, rigorous and perfect testing methods and professional technical teams. AOX measures every action with international first-class standards, and provides customers with reliable products is the meaning of AOX existence!
"AOX-M" is a product developed by AOX itself and belongs to Electric Motor Operated Multi Turn Valve Actuator With Handwheel. The excellent quality of products comes from high-precision equipment, rigorous and perfect testing methods and professional technical teams. AOX measures every action with international first-class standards, and provides customers with reliable products is the meaning of AOX existence!
"AOX-M" series Electric Motor Operated Multi Turn Valve Actuator With Handwheel is designed to ensure safety, reliability, labor saving and small size. When power is off, disconnect the motor from the actuator by operating the red button in the middle of the handwheel and start manual operation. Because of the self-locking turbine separation between the motor and the operating shaft, it is easy to switch to manual operation even when the actuator is at the maximum torque value. After starting the motor, the manual operation will be automatically disengaged, and the hand wheel will not work when the motor is operated. (Note: in case of no power, the electric actuator will remain in permanent manual state)
Electrical interface: |
2* NPT 3/4 , 1* NPT1 1/2 |
|
Ingress Protection: |
IP67 , Optional:IP68 |
|
Connection size: |
ISO5210(Thrust torque type)and JB2920(Three claw type) |
|
Motor Specifications: |
Class F, with thermal protector up to +135 °C (+275 °F) |
|
Working System: |
On-off Type:S2 15 min, no more than 600 times per hour start. |
|
Modulating Type: |
S4 50 %, up to 600 triggers per hour |
|
Applicable Voltage: |
3 phase:AC 380 V (±10 %) /50/60 Hz (±5 %) |
|
Dead Zone: |
≤2% |
|
Time Lag: |
N/A |
|
Other Function: |
Torque protection;Motor overheat protection;Moisture-resistant heaters (anti-moisture device) |
|
Shell: |
Enclosure:IP67(IP68 optional),NEMA4 and 6 |
|
Auxiliary limit switch: |
1×Open/ Close, SPDT,250V AC 10A(on/off model) |
|
Space heater: |
30W (110/220V AC) Condensation preventing (according to conditions, can be adjusted) |
|
Conduit entry: |
Double seal 3×(PT3/4”、PT1”、PT1-1/2”optional) |
|
Ambient temperature: |
-25℃~+70℃(-30℃、-40℃、-60℃optional) |
|
Lubrication: |
Special oil for 00 actuators |
|
Material: |
Ductile iron, high-strength aluminum alloys, steel, aluminum bronze, polycarbonate |
|
Ambient humidity: |
Max 90%RH |
Non-Condensing |
Anti-vibration: |
X Y Z 10g,0.2~34 Hz,30 minutes |
|
External coating: |
Dry powder, epoxy polyester,high anti-corrosion |
|
Overload protection: |
Torque peak overload protection |
Model |
Output torque |
Speed |
Maxshaft diameter |
Power |
Rated current(A)50HZ |
Flange |
Weight |
three phases |
|||||||
N·m |
RPM |
mm |
W |
380V |
ISO5210 |
Kg |
|
AOX-M-007 |
70 |
45 |
Φ28 |
400 |
2.42 |
F10 |
32 |
70 |
90 |
400 |
2.95 |
||||
AOX-M-010 |
120 |
35 |
Φ28 |
600 |
2.25 |
F10 |
38 |
120 |
70 |
600 |
3.18 |
||||
120 |
105 |
800 |
5.15 |
||||
AOX-M-020 |
300 |
34 |
Φ40 |
1100 |
4.50 |
F14 |
68 |
300 |
67 |
1100 |
6.85 |
||||
AOX-M-050 |
450 |
34 |
Φ40 |
1100 |
9.58 |
F14 |
70 |
450 |
67 |
1500 |
14.80 |
||||
AOX-M-060 |
600 |
34 |
Φ55 |
3000 |
10.89 |
F16 |
103 |
600 |
67 |
4000 |
16.50 |
||||
AOX-M-080 |
800 |
34 |
Φ55 |
3000 |
12.43 |
F16 |
103 |
800 |
67 |
4000 |
23.50 |
||||
AOX-M-100 |
1000 |
34 |
Φ55 |
4000 |
30.20 |
F16 |
103 |
1. The modulated multi-turn electric actuators of the AOX-M series can be combined with various control combinations, including simple on/off and intelligent modulated control or fieldbus interfaces. The latest non-intrusive infrared setting design
2. Setting and diagnostics of the AOX-M series explosion-proof multi-turn electric actuators can be carried out via the sealed display without opening the housing. The effective distance between the setting tool and the display is approx. 1-1.5m.