High speed electric motor multi turn actuator is applied in controlling various valves and other similar products, include butterfly valve, ball valve, gate valve, control valve and etc.Over the years, our High speed electric motor multi turn actuator have been exported in batches every year, and have been widely and successfully used in water treatment, petroleum, electric power, chemical and other industries. AOX is a Chinese electric actuatormanufacturer.AOX will design and manufacture products solidly and continue our efforts to create more value for customers.
High Speed Electric Motor Multi Turn Actuator is applied in controlling various valves and other similar products, include butterfly valve, ball valve, gate valve, control valve and etc.Over the years, our High Speed Electric Motor Multi Turn Actuator have been exported in batches every year, and have been widely and successfully used in water treatment, petroleum, electric power, chemical and other industries. AOX is a Chinese electric actuatormanufacturer.AOX will design and manufacture products solidly and continue our efforts to create more value for customers.
High Speed Electric Motor Multi Turn Actuator is specially designed for all multi turn valve applications (linear motion valves)such as globe valve, gate valve, and etc.Our High Speed Electric Motor Multi Turn Actuator can be customized according to the special requirements of customers. AOX has its ownfactoryinChina.Based on a wide range of products including high performance multi turn, partl turn,and linear actuators, AOX offer automated solutions for all valve types, ranging from ball valves to dampers.
Model |
Output torque |
Speed |
Maxshaft diameter |
Power |
Rated current(A)50HZ |
Flange |
Weight |
three phases |
|||||||
N·m |
RPM |
mm |
W |
380V |
ISO5210 |
Kg |
|
AOX-M-007 |
70 |
45 |
Φ28 |
400 |
2.42 |
F10 |
32 |
70 |
90 |
400 |
2.95 |
||||
AOX-M-010 |
120 |
35 |
Φ28 |
600 |
2.25 |
F10 |
38 |
120 |
70 |
600 |
3.18 |
||||
120 |
105 |
800 |
5.15 |
||||
AOX-M-020 |
300 |
34 |
Φ40 |
1100 |
4.50 |
F14 |
68 |
300 |
67 |
1100 |
6.85 |
||||
AOX-M-050 |
450 |
34 |
Φ40 |
1100 |
9.58 |
F14 |
70 |
450 |
67 |
1500 |
14.80 |
||||
AOX-M-060 |
600 |
34 |
Φ55 |
3000 |
10.89 |
F16 |
103 |
600 |
67 |
4000 |
16.50 |
||||
AOX-M-080 |
800 |
34 |
Φ55 |
3000 |
12.43 |
F16 |
103 |
800 |
67 |
4000 |
23.50 |
||||
AOX-M-100 |
1000 |
34 |
Φ55 |
4000 |
30.20 |
F16 |
103 |
Torque Range: 40 - 1000 Nm Direct Output
Ambient Temperature: -30°C --+70°C Optional: -40°C- 60°C
Anti-vibration Level: JB/T8219
Noise Level: Less than 75 dB within 1 m
Corrosion level: Epoxy powder coating NEMA 4X corrosion protection is optional.
Applicable Voltage:3 phase: AC 380 V (±10 %) /50/60 Hz (±5 %)
optional: 1 phase AC 220 V
On/off type signal:
Input : AC 110/220 Input
Signal Feedback: Integrated fault contacts,Close the valve contact,Open the valve contact
Motor overheat protection
Moisture-resistant heaters (anti-moisture device)
Reliable electronic system
Phase sequence self-correction
Motor overheat protection
Limit and torque sensing
Two-wire control protection
Three-phase power phase sequence protection
Remote control settings
Self-diagnosis fault alarm
1. Motor protection for high speed electric motor multi
turn actuator .In order to protect the motor against overheating, there are two series of thermal switch installed in the three-phase motor or single-phase motor winding inside. They are involved in the control circuit to prevent damage to the motor because of winding overheating.
2.Diferent control options meet your specific requirement.
High Speed Electric Motor Multi Turn Actuator can be combined with various controls from simple On/off and intelligent modulating control or fieldbus interface.
3.Integrated Local control for High Speed Electric Motor Multi Turn Actuator .
Local control switches and locking type selector switch local/stop/remote are magnetic switches, controlled by magnetic reed, thus assure the damp proof sealing inside of the actuator.