"AOX-M" is a product developed by AOX itself and belongs to the new desigh automation electric multi turn valve actuator. AOX is a manufacturer of electric actuators with more than 20 years of experience. It is a first-class supplier of Petro China and has obtained the national explosion-proof production license for industrial products, 65 national patents and the certification of national high-tech enterprises.
"AOX-M" is a product developed by AOX itself and belongs to the New Desigh Automation Electric Multi Turn Valve Actuator. AOX is a manufacturer of electric actuators with more than 20 years of experience. It is a first-class supplier of Petro China and has obtained the national explosion-proof production license for industrial products, 65 national patents and the certification of national high-tech enterprises.
"AOX-M" series new design automation electronic multi turn valve actuator has absolute stroke measurement without battery. The position of the valve is determined by the multi rotation measurement encoder. After the displacement caused by the power-off handwheel is energized again, the real-time position of the valve can be recognized immediately, without trial run commissioning and battery support.
Speed: |
34 35 45 67 70 90 (rpm) |
|
Ambient Temperature: |
-30°C --+70°C Optional: -40°C- 60°C |
|
Anti-vibration Level: |
JB/T8219 |
|
Noise Level: |
Less than 75 dB within 1 m |
|
Working System: |
On-off Type:S2 15 min, no more than 600 times per hour start. |
|
Modulating Type: |
S4 50 %, up to 600 triggers per hour |
|
Applicable Voltage: |
3 phase:AC 380 V (±10 %) /50/60 Hz (±5 %) |
|
Optional: |
1 phase AC 220 V |
|
Input : |
AC 110/220 Input |
|
Signal Feedback: |
Integrated fault contacts,Close the valve contact,Open the valve contact |
|
Modulating type signal: |
Input signal:4 - 20 mA; 0 - 10 V; 2 - 10 V;Output signal:4 - 20 mA; 0 - 10 V; 2 - 10 V |
|
Loss Signal Mode Setting: |
N/A |
|
Dead Zone: |
≤2% |
|
Time Lag: |
N/A |
|
Other Function: |
Torque protection;Motor overheat protection;Moisture-resistant heaters (anti-moisture device) |
|
Shell: |
Enclosure:IP67(IP68 optional),NEMA4 and 6 |
|
Ambient temperature: |
-25℃~+70℃(-30℃、-40℃、-60℃optional) |
|
Lubrication: |
Special oil for 00 actuators |
|
Material: |
Ductile iron, high-strength aluminum alloys, steel, aluminum bronze, polycarbonate |
|
Ambient humidity: |
Max 90%RH |
Non-Condensing |
Anti-vibration: |
X Y Z 10g,0.2~34 Hz,30 minutes |
|
Electrically: |
Integrated control unit with a non-invasive rotary switch |
Model |
Output torque |
Speed |
Max shaft diameter |
Power |
Rated current(A)50HZ |
Flange |
Weight |
three phases |
|||||||
N·m |
RPM |
mm |
W |
380V |
ISO5210 |
Kg |
|
AOX-M-007 |
70 |
45 |
Φ28 |
400 |
2.42 |
F10 |
32 |
70 |
90 |
400 |
2.95 |
||||
AOX-M-010 |
120 |
35 |
Φ28 |
600 |
2.25 |
F10 |
38 |
120 |
70 |
600 |
3.18 |
||||
120 |
105 |
800 |
5.15 |
||||
AOX-M-020 |
300 |
34 |
Φ40 |
1100 |
4.50 |
F14 |
68 |
300 |
67 |
1100 |
6.85 |
||||
AOX-M-050 |
450 |
34 |
Φ40 |
1100 |
9.58 |
F14 |
70 |
450 |
67 |
1500 |
14.80 |
||||
AOX-M-060 |
600 |
34 |
Φ55 |
3000 |
10.89 |
F16 |
103 |
600 |
67 |
4000 |
16.50 |
||||
AOX-M-080 |
800 |
34 |
Φ55 |
3000 |
12.43 |
F16 |
103 |
800 |
67 |
4000 |
23.50 |
||||
AOX-M-100 |
1000 |
34 |
Φ55 |
4000 |
30.20 |
F16 |
103 |
Manual operation: The handwheel can be used to operate the multi-turn actuator during test runs or in emergency conditions. Manual operation is initiated by disconnecting the motor from the actuator by operating the red change-over handle. Due to the self-locking turbine separation between the motor and the operating shaft, it is easy to switch to manual operation even when the actuator is operating at maximum torque values. After starting the motor, the manual operation is automatically disengaged. The handwheel does not operate while the motor is being operated.