"AOX-R" series new design 1/4 turn electric actuator is a newly designed quarter turn electric actuator developed and manufactured by AOX, a Chinese manufacturer.The "AOX-R" series has been awarded the CCS, DNVGL and EU CE. "AOX-R" series is the latest designed and upgraded electric actuator of AOX, belonging to part turn electric actuator, with torque range of 30 ~ 5000NM.
"AOX-R" series electric valve actuator is a newly designed quarter turn electric actuator developed and manufactured by AOX, a Chinese manufacturer.The "AOX-R" series has been awarded the CCS, DNVGL and EU CE. "AOX-R" series is the latest designed and upgraded electric actuator of AOX, belonging to part turn electric actuator, with torque range of 30 ~ 5000NM.
The "AOX-R" series New Design 1/4 Turn Electric Actuator is suitable for use in various industries such as petroleum, chemical and water treatment and can be used to control valves such as ball valves, butterfly valves and dampers. When the "aox-r" series electric valve actuator is operated manually, the power must be cut off first; Remove the rubber cap of the reduction cover and insert the attached handle into the hexagonal hole; Turn the manual handle clockwise to reduce the opening. It should be noted that when the opening is turned to the fully open and fully closed positions, the limit switch will act and rotate for half a turn, and it will touch the mechanical stopper. Excessive rotation will cause damage to other parts. Therefore, excessive force should be avoided.
Torque range: |
30 ~ 5000NM; |
Switching time: |
20 ~ 200S; |
Single phase: |
AC220V / AC110V / AC24V / DC24V; |
Manual operation: |
mechanical handle (optional handwheel); |
Motor: |
squirrel cage asynchronous click, insulation class H; |
Dryer: |
30W, optional. |
Working time : |
S1 long time standard for both On-off and modulating type.S2 standard, 30 min. |
Related humidity: |
<90%(25℃). |
Local Control Unit: |
Local control knob of open/close/stop, switch knob of close control remote control/Bus control(non-intrusive) |
Display Mode: |
LCD, indication of opening(0-100%) and open/close fault. |
Control Mode: |
On-off signal control, Modulating (proportional regulation) control, Fieldbus Control etc. |
Type of Field-bus Signal: |
Modbus-RTU, Profibus-DP, etc. |
Model |
Maximum |
Actuation Time |
Output Shaft (mm) |
Electrical |
Single-phase |
Weight |
|
N·M |
( 90°) |
Square |
Deep |
(W) |
220V(A)50HZ (kg) |
(kg) |
|
AOX-R-003 |
30 |
20 |
11×11 |
15.5 |
8 |
0.24 |
2.1 |
AOX-R-005 |
50 |
30 |
14×14 |
18 |
10 |
0.23 |
3.6 |
AOX-R-008 |
80 |
30 |
14×14 |
18 |
10 |
0.24 |
3.6 |
AOX-R-010 |
100 |
30 |
17×17 |
22.5 |
15 |
0.41 |
4.6 |
AOX-R-015 |
150 |
40 |
17×17 |
22.5 |
15 |
0.41 |
4.6 |
AOX-R-020 |
200 |
30 |
22×22 |
26 |
60 |
0.44 |
13 |
AOX-R-030 |
300 |
30 |
22×22 |
26 |
60 |
0.48 |
13.4 |
AOX-R-040 |
400 |
30 |
22×22 |
26 |
60 |
0.54 |
13.8 |
AOX-R-060 |
600 |
40 |
27×27 |
32.5 |
60 |
0.57 |
14 |
AOX-R-080 |
800 |
40 |
27×27 |
32.5 |
90 |
0.91 |
14.3 |
AOX-R-100 |
1000 |
40 |
27×27 |
32.5 |
90 |
1.18 |
14.5 |
AOX-R-160 |
1600 |
60 |
MaxΦ60 |
133 |
90 |
1.08 |
68 |
AOX-R-200 |
2000 |
60 |
MaxΦ60 |
133 |
90 |
1.30 |
68 |
AOX-R-300 |
3000 |
120 |
MaxΦ60 |
133 |
90 |
1 |
68 |
AOX-R-400 |
4000 |
200 |
MaxΦ60 |
133 |
90 |
0.93 |
68 |
AOX-R-500 |
5000 |
200 |
MaxΦ60 |
133 |
90 |
1 |
68 |
Other electric actuators |
AOX-R series |
|
|
Other electric actuator manufacturers use M3 screws with inaccurate positioning and easy to slide, and the potentiometers used are unknown brands in China, with poor stability and short service life. By improving the electrical cam structure, AOX integrates four cams into two, and uses butterfly springs to isolate them. The top is pressed by anti loosening nuts, and imported potentiometers are used, which makes the debugging of "AOX-R" series electric actuators more convenient and faster. |
The protection level of "AOX-R" series New Design 1/4 Turn Electric Actuator has reached IP67, and we support the customization of IP68.
Using the "AOX-R" series New Design 1/4 Turn Electric Actuator, We can see this through our lens construction. The lens construction is a mechanical seal construction rather than the chemical binders used in other plants to avoid inadequate brake sealing due to chemical binders deteriorating under high temperature and pressure.